Service available now · 50 states Mon–Sun, 7am–9pm

GE Home Appliances
Models & Support

Browse every GE appliance category — dishwashers, dryers, freezers, ice makers, microwaves, ovens, ranges, range hoods, refrigerators, washers, and wine coolers. Find models, error codes, repair guides, and expert service.

11 Categories
180 Error codes
50 States covered
24h Avg. response

Schedule GE
appliance repair

Experienced technicians in all 50 US states. Average response within 24 hours.

  • Experienced GE specialists
  • Genuine OEM parts
  • 30-day labor warranty
  • Upfront pricing

Browse by appliance type.

/01

Dishwashers

GE dishwashers, including the tall-tub GDT665SSNSS, display a genuine GE-published error-code set — C1 through C8 for drain, fill, and temperature problems, plus PF for power failure and a dedicated leak-detection alert — that we read directly from the control panel before diagnosing a ge dishwashers service call.

/02

Dryers

GE electronic dryers, including gas and electric GTD-series models such as the GTD72EBSNWS, display E1 (thermistor failure), E2 (high-limit tripped or inlet thermistor short), and E3 (exhaust over-temperature, almost always from a blocked vent) error codes, while timer-dial GE dryers carry no display and are diagnosed by symptom.

/04

Ice Makers

GE ice makers are mostly built into a refrigerator freezer compartment, where a problem surfaces as the fridge's own CI check-icemaker code, while the standalone GE Profile Opal nugget countertop maker uses its own E1, E2, E3, and T3 indicators that should be verified against the specific unit's manual before diagnosis.

/05

Microwaves

GE over-the-range microwaves such as the JVM3160RFSS display a published F-series error-code table — F1/F2 for the thermal sensor, F3/F10 for the touchpad or touch screen, F4/F5 for the humidity sensor, and F6 for the temperature probe — that we read from the control panel before diagnosing a ge microwaves service call.

/06

Ovens

GE wall ovens use a published F-series error-code table — F0/F1/F6/F7 for touchpad problems, F2/F20 for over-temperature, F3/F4 for a temperature-sensor failure, and F9/FC for a door-lock circuit failure — that we read directly from the control panel before diagnosing a ge ovens service call.

/08

Ranges

GE ranges — gas models such as the JGB735EPES and electric models in the JB-prefix family — are largely symptom-based on the cooktop side (igniter or element failures), while the built-in oven side of the same range can display GE's own F-series error codes shared with GE's standalone wall ovens.

/09

Refrigerators

GE refrigerators span French-door models like the GNE27JYMFS and GFE28GYNFS, top-freezer units like the GTS18GTNRWW, and side-by-side GSS/PFS models, all engineered and built by GE Appliances rather than rebadged from an outside manufacturer, and most current units display GE's own published error codes such as FF, CC, and dE.

/10

Washers

GE washers on electronic front-load and Direct-Drive top-load platforms — including the GTW720BSNWS — display E-series error codes such as E22 (fill timeout), E23 (drain timeout), E30 (drain-pump signal loss), E42 and E45 (motor and door-lock failures under overload), and E58 (main control), while mechanical dial washers show no codes and are diagnosed by symptom.

GE home appliances explained

What GE makes, and how to identify it

Unlike a house brand, GE Appliances designs and builds its own appliances at Appliance Park in Louisville, Kentucky, and has been owned by Haier Smart Home since 2016. Its appliances are sold under the GE, GE Profile, Café, and Hotpoint names (its luxury sibling, Monogram, sits outside the scope of this site). Every unit carries its own model and serial number on a rating plate, and the serial’s two-letter date code — month, then year — is the key to dating any GE appliance accurately. Our lineup spans eleven categories, repaired here under the same roof: refrigerators, freezers, ice makers, wine coolers, washers, dryers, dishwashers, ranges, range hoods, ovens, and microwaves. Browse every category from the links below or identify your unit in the model library. We are an independent, third-party service and are not affiliated with, authorized by, or endorsed by GE Appliances or General Electric Company.

Laundry and dishwashing

GE washers span top-load and front-load electronic-control machines, and dryers come in matching electric and gas configurations. GE dishwashers run on GE’s own tall-tub GDT platform with its published C-series display codes.

Refrigeration and cooking

GE refrigerators span French-door, top-freezer, and side-by-side body styles across the GE and GE Profile lines, while standalone freezers come in upright and chest configurations. GE ranges pair a gas or electric cooktop with an oven running GE’s Electronic Oven Control, wall ovens share that same control platform in single and double configurations, and microwaves come in over-the-range and countertop styles.

Ice, wine, and ventilation

GE ice makers are either the automatic module built into a refrigerator or the standalone GE Profile Opal countertop line, and wine coolers are GE Profile and Café single- and dual-zone beverage centers. GE range hoods cover under-cabinet, wall-mount, and over-the-range configurations.

The thread that defines GE

Across every category the defining fact is the same: GE engineers its own control platforms, so the error-code system, the parts, and the repair approach follow directly from the model and serial number — which is why identifying the appliance first, through its model number, points a technician at the right part the first time. Our experienced, independent technicians service every GE, GE Profile, Café, and Hotpoint appliance regardless of age. If your appliance is showing a problem, start with the error-code library, and when you are ready, book a repair and our team will confirm the next available visit.

C — Get started

Need GE appliance
repair service?

Experienced technicians, genuine parts, 30-day labor warranty. Service available in all 50 US states.